The film maker's name and film ID numbers can be read correctly. The base side of the film is the side where Go to the section listedīelow that matches the type of transparency you want to scan. Load your transparency into the film holder and position it on the scanner'sĭocument table in the window of the film adapter. Open the top of the film adapter, holding the base down. Make sure the film adapter cable is plugged into the scanner and the Touching the film surface with bare hands can leave fingerprints See Cleaningįollow the steps below to load film or slides. The scanner's document table, and the narrow window near the hingesīefore scanning transparencies. Wipe the inside of the film adapter cover,.If you plan to scan transparent materialsįrom the EPSON Smart Panel or the EPSON Photo Print utility, click.You can scan slides and film in the 4 x 5 inch (101.6 xġ27 mm) scanning area of the film adapter. The following sections explain how to load slides and film. When the scanner warms up, the green light Plug in the scanner and connect it to your computer. Place the optional film adapter on the document table so that the hingesįace the rear of the scanner and it fits on the table.Ĭonnect the film adapter cable to the scanner's transparency unit connector. The built-in transparency unit for details. Remove the built-in transparency unit (scanner cover). Make sure the scanner is unplugged and disconnected from your computer. When you are finished scanning with the optionalįilm adapter, reattach the scanner cover and reconnect the cable.įollow the steps below to install the optional film adapter Unplug the scanner and disconnect it from your computer.ĭisconnect the cable for the built-in transparency unit from the connector You need to remove the built-in transparency unit (scannerĬover) before installing the film adapter. Keep the packaging to use for storing the film adapter. If any items are missing or damaged, contact yourĮPSON dealer immediately. When you first open the package, make sure that all theįollowing items are included. Most illustrations shown in this section are for the Perfection 2400 Photo, so they may be different in appearance from your scanner. The film adapter can be attached or removed easily when you alternate scanningīetween transparent materials and normal photos or reflective (paper) documents. Lets you scan negatives and transparencies in the 120/220 (6 x 9 cm) and 4 xĥ-inch (101.6 x 127 mm) formats simply by installing the unit on your scanner. Film Adapter for Perfection 1660 Photo and 2400 Photo
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |